Set up your DGX Spark for GB10SOR. Keep DGX OS for NVIDIA hardware updates.
Before you start: The GB10SOR AArch64 USB image was verified on DGX Spark, including internal NVMe detection and installation alongside DGX OS. Use only the ISO and matching SHA256SUMS from the same release.
1. Back up and update
Back up your files and keep a DGX OS recovery USB. Plug in the Spark, stop running models, and update through DGX Dashboard. Restart when asked.
2. Make the USB
Get the GB10SOR DGX Spark AArch64 installer and its matching SHA256SUMS file. Run sha256sum --check SHA256SUMS. If either file is missing or the checksum fails, stop. In balenaEtcher: choose the installer → your spare USB → Flash. Check the USB’s name and size; this erases it. Wait for validation, then eject.
3. Start from USB
Connect the USB, keyboard, and monitor. Restart and immediately hold Esc. Choose Save & Exit → Boot Override → your USB.
First time using the boot menu?
UEFI (also called EFI) is the menu before DGX OS starts. Use the arrow keys and Enter. Boot Override starts from USB once; it doesn’t install anything.
If DGX OS loads, restart and try Esc again. If the USB is missing or Secure Boot blocks it, follow the verified installer’s guide. NVIDIA’s boot-menu steps.
4. Keep both systems
Follow the installer’s guide. It must see the internal NVMe and DGX OS. Choose Install alongside only if offered. Never choose Erase disk or Replace partition. Preserve DGX OS, recovery, and EFI partitions; don’t format them.
Stop if the NVMe is missing, the alongside option is absent, the drive is encrypted, or an erase warning is unclear. After installing, remove the USB and check that both systems start.
5. Pick a model
Choose a recipe in Model Cards. Finish its setup and download the model files before copying its command. One-command launch comes after setup.
What setup does a recipe need?
The current cluster launchers need NixOS configured for your Spark count, cabling, network addresses, SSH access, GPU drivers, and model files. Some also check exact host names and NixOS builds. A different setup can fail, even if NixOS works.
Use your own reviewed cluster configuration. Copying the launch command won’t create it. More in the FAQ.
Rather keep DGX OS?
You can use the Nix package manager with Graham’s supported playbooks. No OS reinstall needed. DGX OS compatibility is unverified for GB10SOR’s full model catalog.
Try Nix on DGX OS
Nix adds software; NixOS is a separate operating system. Nix can run on DGX OS, but it won’t apply the NixOS cluster setup.
On the Spark, open Terminal. Click a clipboard icon, then right-click in Terminal → Paste → Enter. Wait for each command to finish. Passwords stay invisible as you type.
Install Nix
Install Nix in multi-user mode using the official instructions. Then enable flakes in /etc/nix/nix.conf:
experimental-features = nix-command flakes
Open a new terminal and confirm the daemon is available:
nix --version
nix store ping --store daemon
Check the GPU
This uses Graham’s ready-built packages, then checks that Nix can use the Spark’s GPU. The first download can take a while.
export NIX_CONFIG='experimental-features = nix-command flakes'
nix shell nixpkgs#cachix --command cachix use graham33 &&
nix develop github:graham33/nixos-dgx-spark/43fff730b076c9ea490f8a26ee55f7ca0de3239e#cuda \
--command nixglhost deviceQuery
Look for GB10 and “Result = PASS”. This checks the GPU connection, not a model. Graham’s instructions.
For the repository checkout and exact deployment workflow, use the GB10SOR quickstart.
